Playing The Scene You Have Found; Selecting Clips By Type (Filter Clips Function) - Sony PDW-HD1200 Operation Manual

If planning metadata with user-defined essence
mark has been loaded
You can select user-defined essence marks (see
page 87).
2
Select the essence mark that you want, and then press
the PUSH SET(S.SEL) knob.
The essence mark thumbnail screen displays a list of
frames where the selected essence mark is set.
To switch directly to the Rec Start essence mark
thumbnail screen
Before starting, set setup menu item 153 FIND MODE to
"clip & rec start mark".
By pressing the DISPLAY button with the clip thumbnail
screen displayed, you can switch directly to the Rec Start
essence mark thumbnail screen. As long as the setting of
setup menu item 153 does not change, the DISPLAY
button switches between the clip thumbnail screen and the
Rec Start essence mark thumbnail screen.
This setting allows you to use the DISPLAY button as a
shortcut to Rec Start essence mark thumbnail screen,
which is convenient for checking start points in clip
recorded with the Clip Continuous Rec function.
Also, when the Rec Start essence mark thumbnail screen is
displayed, each press of the THUMBNAIL button
switches between that screen and the clip playback screen
(Resume function). In the clip playback screen, the PREV
and NEXT buttons jump to the previous or next recording
start points.
Note
The DISPLAY button does not switch to the Rec Start
essence mark thumbnail screen from the expand thumbnail
screen or the chapter thumbnail screen.

Playing the scene you have found

After finding a clip with one of the methods explained in
the previous section, "Searching with thumbnails" (see
page 68), you can cue up and play the clip that you have
found.
70
Thumbnail Operations
To search for a thumbnail position and cue
it up
See page 66 for more information about GUI screen
operations.
1
Select the thumbnail that you want to cue up.
Clip:C0010
OK
TC 00:23:00:25 TC 00:23:40:07
TC 00:25:49:23 TC 00:26:22:10
TC 00:28:06:09 TC 00:28:22:02
30 NOV 2005 13:40
DATE&TIME
2
Press the PUSH SET(S.SEL) knob.
To play clips with the PUSH SET(S.SEL) knob
In the Disc Menu, set Settings >SET Key on Thumbnail to
"Cue up & Play". Playback begins from the selected frame
when you press the PUSH SET(S.SEL) knob, in the same
way as when you press the PLAY button.
To search for a thumbnail position and
play from there
See page 66 for more information about GUI screen
operations.
1
Select the thumbnail that you want to play.
2
Press the PLAY button.
TCR 00 : 26 : 22 : 10
PLAY
C0010: 010/041
Selecting clips by type (Filter Clips
function)
You can select clips of a certain type from among all of the
clips on a disc (Filter Clips function). For example, you
can do the following.
010/041
TC 00:24:45:11 TC 00:25:06:14
TC 00:27:19:04 TC 00:27:51:09
TC 00:23:34:18 TC 00:23:54:22
0:00:04:14
DUR