Table of Contents
Advertisement
Making Settings Using a Personal Computer
DMBK-R107
To confirm the presence of a board:
When you select the slot into which the DMBK-R107
has been inserted, you can confirm whether or not the
TDIF interface runs on a DA-88 mode.
To perform settings:
In Edit Mode, you can change the DA-88 mode.
1
Click the [ON] or the [OFF] radio button.
A column where the current setting is ON is
displayed in a darker color than ones where the
current setting is OFF.
When a TEAC DA-88 is connected: Click the
[ON] radio button.
When a device other than a TEAC DA-88 is
used: Click the [OFF] radio button.
2
Click the [APPLY] button.
The settings are executed.
134
DMBK-S101
To confirm the presence of a board:
When the slot into which DMBK-S101 has been
inserted is selected on the SLOT STATUS page, you
can confirm the +48 V power supply ON/OFF, PAD
ON/OFF, and reference input level settings for each
channel.
To change the setting:
You can change the settings in Edit Mode. Settings
changed here are also applied to the settings of the +48
V button, PAD button, and LEVEL button on the SIU-
RM101 remote control unit.
1
Change the setting of the +48 V power supply ON/
OFF, PAD ON/OFF, and reference input level.
Left column of REFERENCE LEVEL: Values for PAD OFF.
Right column of REFERENCE
LEVEL: Values for PAD ON
Reference input level before it is
changed (current setting)
The column of the selected value is displayed with reversed.
Advertisement
Chapters
Table of Contents
