Table of Contents
Advertisement
To make settings:
In Edit Mode on the SLOT STATUS page, when the
slot to which a DMBK-R109 is inserted is selected,
you can set the format for the MADI output signal on/
off function.
• Format pattern
• Word clock
Proceed as follows to make settings.
1
To set Format Pattern, click either the [LEGACY]
or the [2FS] radio button, and to set word clock,
click either the [1/1] or the [1/2] radio button.
2
Click the [APPLY] button.
To change OUTPUT STATUS:
See "To make the settings" on page 132 for the
DMBK-R103.
DMBK-R104
When the slot into which the DMBK-R104 is inserted
is selected you can confirm the channel status, and in
Edit Mode, you can set the sampling converter on/off
function.
To confirm the channel status:
Click the channel number in the CHANNEL SELECT
column.
Click the desired channel number.
To set the sampling channel converter to on or off
In Edit Mode, for 4 groups, channels 1 and 2, channel
3 and 4, channels 5 and 6, and channels 7 and 8, you
can set the sampling rate converter function on/off
respectively.
1
Click the [ON] or [OFF] radio button for each
channel group.
A column where the current setting is ON is
displayed in a darker color than ones where the
current setting is OFF.
2
Click the [APPLY] button.
133
Advertisement
Chapters
Table of Contents
