Table of Contents
Advertisement
Moving to the Edit Mode window
1
Enter the password in the Edit password text box.
Enter the password
For detailed information on the password, see
"Setting the IP address and so on" on page 121.
2
Click the [Unlock] button.
The button name changes to Lock.
The window changes from View Mode to Edit
Mode.
To exit from the Edit Mode
Click the [Lock] button. The window changes to View
Mode.
Changing the unit name
You can change the unit name on the TOP page of Edit
Mode.
1
Select the UNIT Name text box, and enter a new
name.
You can enter up to 8 characters as a name.
Unit Name text input box
When you enter characters that cannot be used as
part of a name, the following error message
appears.
For detailed information on characters you can use, see
"Characters that can be entered" on page 108.
2
Click the [APPLY] button.
The name is changed.
To cancel the operation performed in step
1
Click the [CANCEL] button instead of the
[APPLY] button. The name is reset to the original
name.
127
Advertisement
Chapters
Table of Contents
