Option Boards - Sony SIU-100 Operating Instructions Manual

Locations and Functions of Parts and Controls

Option Boards

This section gives a brief explanation of the 8 kinds of
option boards that can be inserted into the SIU-100/
100T.
DMBK-R101 8CH Analog Line In Board
1 ANALOG INPUT (analog signal input)
connector
Inputs balanced analog signals (+4 dBu standard).
DMBK-R102 8CH Analog Line Out Board
1 ANALOG OUTPUT connector
Outputs balanced analog signals (+4 dBu standard).
94
For information the DMBK-S101 8CH Mic Pre Amp board,
see "DMBK-S101 8 CH Mic Pre Amp Board (Option)" on
page 99.
1 ANALOG INPUT connector
Specifications
Input connector: XLR-3-31 (female), × 8, balanced
Pin assignment: 1: GND, 2: HOT, 3: COLD
Reference input level: +4 dBu
Maximum input level: +24 dBu
Input impedance: 10 kΩ
1 ANALOG OUTPUT connector
Specifications
Output connector: XLR-3-32 (male), × 8, balanced
Pin assignment: 1: GND, 2: HOT, 3: COLD
Reference output level: +4 dBu (load impedance
10 kΩ)
Maximum output level: +24 dBu (load impedance
10 kΩ)
Output impedance: 150 Ω