Table of Contents
Advertisement
Columns where +48 V power supply and PAD are
set to ON are displayed in a darker color.
2
Click the [APPLY] button.
The settings are executed.
To confirm the presence of all of the DMBK-
S101s at once
Access the MIC AMP page.
For details, see "MIC AMP Page" on page 138.
Sync Page
The Sync page allows you to confirm and make
settings for the sampling frequency, sync reference
signal DI-SYNC and video sync frequency.
You can make the same settings as those on the SYNC
submenu of the SETUP menu of the SIU-100/100T.
Confirming the settings of the sampling
frequency, sync reference signal,
DI-SYNC, and video sync frequency
Click the [Sync] on the status display area.
The SYNC INFORMATION window appears.
On this window, you can confirm the sampling
frequency, sync reference signal, DI-SYNC, and video
sync frequency.
Selecting the sampling frequency, sync
reference signal, DI-SYNC, and video sync
frequency
You can select the sampling frequency, sync reference
signal, DI-SYNC and video sync frequency in Edit
Mode.
1
Select the sampling frequency, sync reference
signal, DI-SYNC and video sync frequency,
respectively.
SAMPLING FREQUENCY: Selects the
sampling frequency.
SYNC REFERENCE: Selects the sync reference
signal.
DI SYNC CH: Selects the slot and channel for DI-
SYNC.
VIDEO FREQUENCY: Selects the video sync
frequency.
2
Click the [APPLY] button.
To cancel the operation done in step 1
Click the [CANCEL] button instead of the
[APPLY] button.
135
Advertisement
Chapters
Table of Contents
