SSANGYONG Rodius 2012.07 Manual page 573

05-6
▶
Operation
Description
Driving mode 2H
4H
4L
2H ↔
Mode change
4H
2H, 4H
↔ 4L
Mode
2 Wheel drive Rear-wheel drive mode. This is used under
(rear wheel) normal or high-speed driving conditions on public
roads or highways.
4 Wheel drive This is used under sandy, muddy or snow-
(high speed) covered road conditions
4 Wheel drive This is used for maximum traction.
(low speed) When cornering with low speed in 4WD condition,
there could be tire dragging, some
mechanical shocks and resistances in vehicle's
drive train. These are normal conditions due to
internal resistance in the drive train when the
4WD system is properly working
2 Wheel drive Shifting is possible while driving at the speed of
↔4 Wheel drive
70 km/h or less
For Automatic Transmission:
2 Wheel drive,
4 Wheel drive
-
(high speed)
↔4 Wheel drive
(low speed)
For Manual Transmission:
-
To make the mode change easily, stop the
vehicle on level ground and turn the mode
switch to the desired position and move the
shift lever to "N"-"R"-"N" while depressing
the brake pedal.
Conditions
Stop the vehicle on level ground and move
the gear selector lever into the "N" position.
Turn the switch to the desired position.
Stop the vehicle on level ground and move
the gear selector lever into the "N" position.
Then turn the switch to the desired position
while depressing the clutch pedal.