SSANGYONG Rodius 2012.07 Manual page 648

11-10
▶
Oil Pump Pressure Check
Check the oil pump pressure to locate any defect
in oil pump.
Before checking the pressure, check the oil
level and belt tension. Prepare the empty
container to collect the spilled oil during the
service.
A. Unscrew the pressure line fitting in power
steering pump.
B. Install the pressure gauge between the
power steering pump and the power steering
oil pressure line.
C. Place the shift lever to neutral position. Apply
the parking brake.
D. Open the valve in pressure gauge. Start the
engine and let it run at idle speed.
E. Turn the steering wheel several times so that
the oil temperature reaches to normal
operating level.
F. Fully close the valve in pressure gauge and
measure the oil pressure.
- To prevent internal damage, do not close the
gauge valve over 10 seconds.
- Keep the oil temperature at proper range.
Relief pressure
90 ± 3 bar