Standing Wave - SSANGYONG Rodius 2012.07 Manual

12-6
2. ABNORMAL TIRE SYMPTOM

1) Standing Wave

Specified tire inflation pressure
During driving, the rotating tire repeats deformation and restoring movement in is tread. This
happens when the tire pressure is low in high speed driving.
However, when the wheel rotating speed is fast, the tire is deformed even before it is restored to
its original shape and the trembling wave appears on the tread portion. If this symptom lasts for
an extended period of time, the tire can be blown out in a short period of time.
If the standing wave symptom occurs on the tire, rubber on the tread comes off and eventually
the tire can be blown out which is very dangerous. When driving at high speed, the inflation
pressure should be increased to decrease heat generation due to extension and contraction
motion, to decrease hydroplaning and to prevent standing wave.
To prevent this symptom, it is recommended to increase the tire pressure 10 ~ 30 % higher than
the specified pressure value in high speed driving.
35psi