SSANGYONG Rodius 2012.07 Manual page 455

Table of Contents

Advertisement

02-24
7) Room Lamp Control
▶ Front Room Lamp
Door coupled front
room lamp switch
5.
The front room lamp output period is extended by 30 seconds (T3) when receiving the unlock
signal from the remote control key again during output.
6.
When a door is opened during its extended period, the lamp stays on. If closed, operates as in
step 2.
The room lamp output stops immediately after receiving the lock signal from driver's door and
7.
passenger's door lock switch while the driver's door and passenger's door are closed.
1.
The front room lamp comes on when opening the
driver's door or passenger's door while the front
room lamp switch is at door coupled position and
the key reminder switch is turned off.
2.
The room lamp stays on for 2 seconds (T1) and
then decays through 3 seconds (T2) when closing
the driver's door or passenger's door.
3.
The room lamp output should stop immediately
after turning on the ignition key during decaying
operation.
4.
The front room lamp comes on for 30 seconds
(T3) when receiving the unlock signal from the
remote control key while the door is closed.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents