SSANGYONG Rodius 2012.07 Manual page 279

(1) Checking
▶
Using battery tester
- PASS (11.0 V or more): Explain to the customer that the battery is reusable.
- Need to be charged (9.0 to 11.0 V): Charge the battery with a charger and reinstall it. Explain it
to the customer.
- Need to be replaced (9.0 V or more): The battery should be replaced due to overdischarging.
(2) How to use battery tester
▶
How it works and How to use it
- Determine battery capacity by fixing current
(load capacity) and time and varying voltage.
Determine battery capacity based on the
- amount of voltage drop when discharging a
fixed load capacity (120 A) for 5 seconds.
Connect the tester to the battery and read
- the display while applying a load for 5
seconds.
▶
How to read display
Red area (①): overdischarge or faulty
-
battery
Yellow area (②): Need to be charged (using
-
a vehicle alternator and a battery charger)
Green area (③): Normal
Red area on the left-hand side of OK (④):
-
- Impossible to charge with an alternator
Green area with OK (⑤): Normally charged
Red area on the right-hand side of OK (⑥):
-
- Overcharged by an alternator
09-7
1451-01