SSANGYONG Rodius 2012.07 Manual page 480

▶
Immobilizer Indicator and Warning Lamp
Immobilizer Indicator and Warning Lamp
(1) When turning the ignition key to ON
position, the ECU transmits the challenge
message to the immobilizer unit to verify
whether the key is valid.
ECU
- Do not drop or shock to the transponder in the key as it may be damaged.
- With a damaged transponder, the engine cannot be started.
- When you erase the code or register an extra key, let the owner attend on the site.
- In any case, the immobilizer system cannot be removed from the vehicle. If you attempt to
remove it and damage the system, starting will be impossible, so never attempt to remove,
damage or modify it.
- The remote engine starter cannot be installed on the vehicle equipped with the immobilizer
system.
This indicator comes on when the ignition
key is communicating with the engine
control unit (during engine starting) and
goes out after starting the engine.
Lamp ON: in communication
Blinking twice for one second: immobilizer
system failure
Blinking once for two seconds: immobilize
unit is not coded
The immobilizer indicator does not
come on if the communication time
between immobilizer key and ECU is
too short.
(6) Only when the two signals are identical, it
recognizes the key as the authorized one and
transmits the positive message to the ECU.
(7) The ECU allows the engine to be started.
03-7
7010-06