SSANGYONG Rodius 2012.07 Manual page 441

02-10
▶ Rain sensing sensitivity control
The wiper relay is turned on and the wiper motor runs one cycle when the volume sensitivity is
increased (ex: from 0 to 1) (while the ignition key is in "ON" position, the wiper switch is in
"AUTO" position, and the wiper motor is in "Parked" position). However, the wiper motor can be
operated only when the rain sensor detects the "Rain Detected" signal.
* If the volume sensitivity is changed more than 2 stages within 2 seconds, the wiper motor runs
only one cycle.