SSANGYONG Rodius 2012.07 Manual page 168

4. GUIDELINES ON ENGINE SERVICE
To prevent personal injuries and vehicle damages that can be caused by mistakes during engine
and unit inspection/repair and to secure optimum engine performance and safety after service
works, basic cautions and service work guidelines that can be easily forgotten during engine
service works are described in.
▶
Cautions before service works
-
For safe and correct works, you must observe the working procedures and instructions in this
manual. And, use the designated tools as follow:
Engine stand / Heavy duty engine jack
-
To prevent the engine from starting abruptly, do not allow anybody to get in the vehicle while
servicing in engine compartment.
- Before work on engine and each electrical equipment, be sure to disconnect battery negative
(-) terminal.
-
Before service works, be sure to prepare the works by cleaning and aligning work areas.
- Do not allow the foreign material get into the fuel injection system.
-
When removing the engine, use only the safety hook on engine and engine hanger. Do not
support the bottom of oil pan with a jack.
▶
Engine and accessories
-
Completely drain the engine oil, coolant and fuel from engine before removal.
-
Before disassembling/assembling the engine components, carefully read the working
procedures in this manual.
-
Make sure to keep the specified tightening torques during installation.
-
Clean and properly lubricate the parts before reassembly.
-
Carefully check that there are not any interference while servicing.
02-11
0000-00