SSANGYONG Rodius 2012.07 Manual page 419

2. CHECKING CABLES AND WIRES
- Check for loose connection or rust.
- Check terminals and wires for corrosion due to electrolyte leakage.
- Check terminals and wires for open circuit.
- Check the wire insulation and coat for damage, cracks or deterioration.
- Check if the conductive parts of the terminals do not contact with vehicle body or other metal
parts.
- Check that the grounding part has continuity with mounting bolts and vehicle body.
Check that wires are properly routed.
- Make sure that wires are securely fixed to avoid contact with sharp body parts and
hightemperature
parts, such as the exhaust manifold and exhaust pipes.
- The rotating parts, such as fan pulley and fan belt, perturbative parts and wiring should be
secured tightly at regular intervals.
- Secure the wiring between the fixed parts, such as the vehicle body, and vibrating parts, such
as the engine, after slackening it slightly to prevent it from being damaged.
01-5
8410-02