SSANGYONG Rodius 2012.07 Manual page 216

03-12
(5) High Pressure System Pressure Test
▶
Fuel rail pressure test
1. Disconnect the pressure sensor connector
(A) and IMV connector (B) from the fuel
rail.
2. Connect the pressure tester to the fuel rail
pressure sensor connector.
3. Crank the engine 2 times for 5 seconds.
-
Read the highest pressure value
displayed on the tester display.
- If the highest pressure value is 1,050 bar
or less, refer to the section "Fuel System
Check Process".