02-16
▶INT Switch Auto Position Reminder (Power-Up Reminder Wiper)
1.
When turning off and on the auto INT switch, the system drives the wiper motor through
LOW relay regardless of communication with rain sensor.
2.
When turning the INT-AUTO switch from the "OFF" to "ON" position with the ignition
switch in the "ON" mode, the LOW relay operates to drive the wiper motor for 1 cycle,
regardless of the rain sensor communication.
After that, when turning the INT-AUTO switch from the "OFF" to "ON" position, the LOW
relay operates to drive the wiper motor for 1 cycle only if data from the rain sensor
indicates rain drops.