Back Panel - RGBlink VSP 628PRO User Manual

1.2.1 Back Panel

Input Connectors
BNC – Genlock
3
Standard Genlock signals can input.
BNC – 3G-SDI
5. 7
Standard 3G-SDI signals can input.
DVI-I – DVI
11 Standard DVI signals can input. The DVI port supports up to HDMI 1.3 if the port
format is set to HDMI.
HDMI-A – HDMI
13
Standard Genlock signals can input.
DP
15
Standard DisplayPort signals can input.
DB15 – VGA
16 Standard VGA signals can input. Additionally this VGA port supports Component
(YPbPr) with the use of a VGA to Component adapter (supplied).
Output Connectors
BNC – Genlock Loop Out
4 Connect to the Genlock input of the next VSP 628PRO or the device with
Genlock input.
BNC – 3G-SDI Loop Out
6. 8
Connect to the SDI input of the next VSP 628PRO or the device with SDI input.
DVI-I – DVI Loop Out
12
Connect to the DVI input of the next VSP 628PRO or the device with DVI input.
HDMI-A – HDMI Loop Out
14 Connect to the HDMI input of the next VSP 628PRO or the device with HDMI
input.
DVI-I – DVI
17 Connect to the monitor or LED display which has DVI interface. (This connector
does not support hotplug).
HDMI-A – HDMI
18
Connect to the display device, video processor or matrix.
VSP 628PRO User Manual
Chapter 1: Your Product
8