Using The Menu; Understanding The Display - RGBlink VSP 628PRO User Manual

3.3 Using the Menu

Use the menu system for convenient and intuitive operation. VSP 628PRO OLED display
shows the menu items. The OLED display will show the default state when the menu is
not in use, or the operation has timed out. Using the MENU button and rotary knob in the
front panel, the OLED display will show the corresponding menus according to user
selections.

3.3.1 Understanding the Display

Turn the power switch to the ON position, the OLED display will show the start-up
interface and show the default menu after completing initialization as below:
Introduce for the above information:
Input Signal
1 Shows the current Input signal that is selected. The related dedicated signal
button will be lit red.
Input Resolution
Show the current input resolution from the selected Input source. To configure
input resolutions, use the EDID Management features. A wide range of input
2
resolutions are supported depending the input – refer to Specification.
If a # symbol is show after the resolution, then a custom resolution is being
used.
Serial Number
Shows the serial of the product.
3
When not displayed here, the serial number can be found via the TECH
SUPPORT menu.
Genlock
4 Displays to whether a Genlock signal is currently being provided (input).
Config from the OUTPUT menu.
System Mode
5 Indicates the current SYSTEM MODE. SYSTEM MODE is set from the
SYSTEM menu.
VSP 628PRO
Chapter 3: Using Your Product
User Manual 17