RGBlink VSP 628PRO User Manual page 79

5. Click the Sync icon
program. The green square in the bottom right means the connection is successful, like
this:
6. Click update icon
7. Click check version icon:
to upgrade VSP628PRO_EDID_XX.bin)
8. Click the button
VSP 628PRO_Packge_Bata_xx.bin ready. Like below:
VSP 628PRO
, which show the information of the windows control
, and open the upgrade toolset, like below:
, and check the version information
. (If the Control Board SW version is 2.13 or lower, it needs
, and choose the upgrade path, get the update file:
User Manual
Chapter 7: Appendix
, while red is disconnect.
78