RGBlink VSP 628PRO User Manual page 38

->Display Setup
b. Push the rotary knob to confirm, turn the rotary knob, select <Card Type> in <Quick
Connection> option, push the rotary knob to confirm, turn the rotary knob, select the
sending card type, for example, select Linsn (VSP 628PRO supports Linsn and
Colorlight sender card, for Nova sender card, it only support brightness and
Gamma adjustment). Shown as follows:
->Quick Connection
*Card Type
c. After setting, turn the rotary knob, select <Quick Connection>, push the rotary knob
to confirm for next setting, shown as follows:
->Sending Card
d. Turn the rotary knob, select <Receiving Card>, push the rotary knob to confirm. Turn
the rotary knob again, and select <Choose Cable>, push the rotary knob to confirm.
Turn the rotary knob, select Port D and push the rotary knob to confirm.
VSP 628PRO
Transition
System
Logo
Senior
Brightness
Output Format
Quick Connection
Card Type
Brightness
Output Format
->Quick Connection
Receiving Card
Chapter 3: Using Your Product
>>
>>
>>
>>
>>
>>
Linsn
>>
>>
>>
Linsn
>>
>>
>>
>>
>>
User Manual 37