RGBlink VSP 628PRO User Manual page 39

e. Turn the rotary knob, and select <Port Offset Y>, push the rotary knob to confirm.
Turn the rotary knob, Set Port Offset Y as 240 (Note: Port Offset Y = Vertical ×
Height, before we set vertical card as 2 and height as 120). Shown as follows:
f. Turn the rotary knob, and select <Connect Type>, shown as follows:
Select the connection mode, the setting is same with Port U. Then connection of
both the Port D and Port U of One Sending Card to LED Screen is finished.
Rendering is as follows:
VSP 628PRO
Sending Card
->Receiving Card
->Choose Cable
Horizontal Card
Vertical Card
Width
Height
Port Offset X
->Port Offset Y
Connect Type
Height
Port Offset X
Port Offset Y
->Connect Type
Chapter 3: Using Your Product
>>
>>
Port D
120
120
240
>>
120
240
User Manual
3
2
0
0
>>
38