Vga Input Offset Or Cannot Be Full Size Shown; Show Blurred Screen When Rotate For I System Input; Can't Do Split For I System Input; Show Black Lines Or Blurred Screen For Dp Input - RGBlink VSP 628PRO User Manual

6.1.5 VGA Input Offset or cannot be Full Size Shown

Frequently
VGA Input Offset or cannot be Full Size Shown
Asked Question
Set Auto Adjust for VGA Input
Push the [MENU] button, then choose <INPUT>, turn the knob and
choose <VGA ADJUST>, push the knob to confirm. Turn the knob and
Troubleshooting
choose <AUTO ADJUST>, the auto adjust time is about 10 seconds. If
auto adjust cannot solve the problem, please manually adjust in <VGA
ADJUST>.
6.1.6 Show Blurred Screen when Rotate for I System
Input
Frequently

Show Blurred Screen when Rotate for I System Input

Asked Question
Change the Input as P System
Troubleshooting VSP 628PRO can not currently support the I system input rotate,
please change the input as P system.

6.1.7 Can't Do Split for I System Input

Frequently
Can't Do Split for I System Input
Asked Question
Change the Input as P System
Troubleshooting VSP 628PRO can not currently support the I system split, please
change the input as P system, or choose the dual 2K mode to do split.

6.1.8 Show black Lines or Blurred Screen for DP Input

Frequently
Show Black Lines or Blurred Screen for DP Input
Asked Question
Switch the Signal Again
The LED screen shows the black lines or blurred screen because of the
Troubleshooting reasons such as some DP input resolutions, change the input
resolution or system default DP. Please push the [DP] button again to
confirm or switch to the other signal and then switch to DP signal.
VSP 628PRO User Manual 65