Capture Logo - RGBlink VSP 628PRO User Manual

3.7 Capture LOGO

1. Push the signal button, and select the input signal.
2. Push the [SCALE] button, turn the rotary knob or numeric keys to set the size and
position of the LOGO.
3. Push the [MENU] button and enter to the menu items, turn the rotary knob and select <Logo>:
4. Push the rotary knob to confirm. Turn the rotary knob again, select <Capture Logo>, and set
"Capture Logo" as "Enable":
Capture logo will finished after a few seconds.
VSP 628PRO
->H Size
V Size
H/V Size
H Pos
->V Pos
Scaling Mode
Reset
Transition
System
->Logo
Display Setup
->Capture Logo
Logo Present
User Manual
Chapter 3: Using Your Product
1857
1080
1857
0
0
FULL
>>
>>
>>
>>
>>
Enable
Logo 1
39