RGBlink VSP 628PRO User Manual page 30

2. Dimmer setting: The adjustment range is 0~100.
3. Effects setting: The setting for effects include brightness, contrast, chroma, hue, color
temperature, color correction, gamma, brightness, H sharpness, V sharpness, noise
reduction, Invert, Flip V, Flip H and Flip 90 Degree.
Split Setting
In split mode, user can set split parameters of single or multiple devices quickly. The split
operations are as follows:
Project: There is one LED display, the size is 3864x1152, divide into right and left halves,
the left width is 1824 and the right width is 2040, we will cascade the two LED displays
with one VSP 628PRO, and display a complete picture in the whole screen.
(1) Connect the interface
Connect the DVI signal to the DVI input interface, connect the DVI output to the left
LED sending card, and connect the HDMI output to the right LED sending card.
(2) Select the system mode
Push the [MENU] button to enter to the menu items, turn the rotary knob to select
<System>:
VSP 628PRO
Note
User can also select <Effects> in <Output>
option by pushing the [MENU] button for setting.
Note
In Dual 2K mode, User need to select the
channel in <Channel Select> before setting.
For example, choose the signal of CHB:
1. Push the [MENU] button to enter to menu
items.
2. Select <Output>, push the rotary knob to
confirm.
3. Turn the rotary knob, and select <Channel
select>.
4. Turn the rotary knob and select CHB.
Select the signal, and CHB will switch to the
5.
selected signal.
Note
In Switcher mode, all the settings above are for
preview.
Transition
->System
Logo
Display Setup
User Manual
Chapter 3: Using Your Product
>>
>>
>>
>>
29