RGBlink VSP 628PRO User Manual page 59

If router's default network segment is 192.168.0.1, then it is same to processor IP address
segment, open up windows control software and user can directly control on VSP
628PRO.
If router's default network segment is 192.168.1.1, then user need to change router's
default gateway or change processor's IP, both methods are available, but we suggest to
change processor's IP.
Method one: Change processor's IP.
Push the [MENU] button on front panel and go into items as below picture shows. Change
processor's IP to be 192.168.1.100, confirm and restart the processor, then user can
control on VSP 628PRO via windows control software.
Method two: Change router's gateway.
Type in 192.168.1.1 on the browser and go into router setting.
Type in default account and code (please refer to the router user manual for the
information).
Go to router setting part and find out "LAN port setting", change the default value
"192.168.1.1" to be "192.168.0.1".
Save the setting and restart the router, then user can control on VSP 628PRO via
windows control software.
VSP 628PRO
Chapter 4: Controlling Your Processor Remotely
User Manual 58