Pip Setting; Dimmer And Effects Setting - RGBlink VSP 628PRO User Manual

PIP Setting

Enable the PIP function
VSP 628PRO supports seamless switch in single image and double images.
Push the [PIP] button, the button light is on, and enable the PIP function.
Select the signal in PIP
VSP 628PRO can output two same or different signals to the output, the settings are as
follows:
1. Push the [PIP] button, and enable the PIP function.
2. Push the [SCALE] or [DIMMER] button, select <Layer Select>, and push the rotary
knob to confirm. (User can also select <Layer Select> in <Input> or <Output> option by
pushing the [MENU] button.
3. Turn the rotary knob, and select main or sub image.
4. Select the signal, and the selected image will be switched to this signal.
Scale Setting
1. Push the [SCALE] button, and enter to the scale function menus.
2. Adjust the H size, V size, H/V size, H pos, V pos and scaling mode by turning the rotary
knob or number buttons.
3. If image quality distorts by improper operation, it can be recover by reset.
Image Size Setting
1. Push the [MENU] button, and enter to the menu items.
2. Turn the knob, and select <Input>, push the knob to confirm.
3. Turn the knob, select <Sizing Adjust>, push the knob to confirm.
4. Adjust the H size, V size, H pos V pos, and mask top, bottom, left and right of the
image by turning the rotary knob or number buttons.
5. If image quality distorts by improper operation, it can be recover by reset.

Dimmer and Effects Setting

1. Push the [DIMMER] button, and enter to the menu items, which include dimmer and
effects.
VSP 628PRO
Note
Note: PIP Setting is applied to Standard Mode.
Note
In PIP mode, user need to select the image that
to set in <Layer Select> option before setting.
Note
In PIP mode, user need to select the image that
to set in <Layer Select> option before setting.
User Manual
Chapter 3: Using Your Product
28