Installing Options - RGBlink VSP 628PRO User Manual

Chapter 7: Appendix

7.3 Installing Options

VSP 628PRO is based on module based structure, user can install or replace the optional
module according to actual need. The installation steps are as follows:
Install the Optional Module
1. Disconnect the power and all the signal and control cables.
2. Unscrew the 5 fixed screws on the top panel and remove the top panel (Figure 1):
(Figure 1)
3. Unscrew the 2 fixed screws on input optional module slot, and pull out the input block
(Figure 2):
VSP 628PRO User Manual 80