Tech Support Menu; Factory Reset Menu - RGBlink VSP 628PRO User Manual

Diag Motion Enable/Disable Diagonal Motion of the selected test pattern. Select
"ON" or "OFF".
If Raster Box (above) is "ON", size settings in this menu for Box X,
Box Y, Box Width and Box Height are displayed. Select Reset to
AOI Raster Box
restore default settings. AOI raster box will display for all signals
except LOGO (Test Pattern).

3.3.12 Tech Support Menu

Shows the device firmware version for each component. Shown are
Main Board HW, Control Board HW, Core Board SW, Control Board
Version
SW, Web COM, Web Server, FPGA1, FPGA2, Optional Input (where
fitted), Input SDI1, Input SDI2, Multi Sync, 2U LCD and Sender Card.
Serial Number Displays the serial number of the device.
Email Provides on display contact information for RGBlink Support by Email.
Website Provides on display contact information for RGBlink website.

3.3.13 Factory Reset Menu

Factory Reset Select "YES" or "NO". Select "YES" to restore default settings.
Factory Reset, Select "YES" or "NO". Select "YES" to restore default settings, but
Save IP keep the IP.
VSP 628PRO
->Version
Serial Number
Email
Website
->WhatsApp
Skype
->Factory Reset
Factory Reset, Save IP
Chapter 3: Using Your Product
>>
>>
>>
>>
>>
>>
>>
>>
User Manual 26