Configure Security For The Display Menus - Emerson Micro Motion 2700 Configuration And Use Manual

Configure device options and preferences
Overview
You can configure whether or not the operator can use a single command to acknowledge
all alerts from the display.
Procedure
1.
2.
5.3

Configure security for the display menus

Display
ProLink III
Field Communicator Configure > Manual Setup > Display > Offline Variable Menu Features
Fieldbus host
Overview
You can control operator access to different sections of the display off-line menu. You can
also configure a password to control access.
Procedure
1.
2.
62
Ensure that the alert menu is accessible from the display.
To acknowledge alerts from the display, operators must have access to the alert
menu.
Enable or disable Acknowledge All Alerts as desired.
Option Description
Enabled (default) Operators can use a single display command to acknowledge all alerts at
once.
Disabled
Operators cannot acknowledge all alerts at once. Each alert must be ac-
knowledged separately.
OFF-LINE MAINT > OFF-LINE CONFG > DISPLAY
Device Tools > Configuration > Transmitter Display > Display Security
LDO TB > EN_LDO_OFFLINE_PWD (OD Index 18)
LDO TB > LDO_OFFLINE_PWD ( OD Index 21)
To control operator access to the maintenance section of the off-line menu, enable
or disable Off-Line Menu.
Option Description
Disabled Operator cannot access the maintenance section of the off-line menu.
To control operator access to the alert menu, enable or disable Alert Menu.
Micro Motion Model 2700 Transmitters with FOUNDATION Fieldbus