Emerson Micro Motion 2700 Configuration And Use Manual page 203

Index and name
#5
MODE_BLK
#6
BLOCK_ERR
#7
UPDATE_EVT
#8
BLOCK_ALM
#9
TRANSDUCER_
DIRECTORY
#10
TRANSDUCER_
TYPE
Configuration and Use Manual
Description
The actual, target, permitted, and normal
modes of the block.
Msg type = REC
Data type = DS-69 (4)
Store = Mixed
Access = RW (OOS) or RW (Auto)
Available in Release 1.0
The error status associated with the hard-
ware or software components associated
with a block.
Msg type = STR
Data type = BIT STRING (2)
Store = Dynamic/20
Access = Read only
Available in Release 1.0
Occurs when a static parameter is changed
while a block mode is not in out of service
(OOS) mode, or when the mode changes
from OOS mode and one or more static pa-
rameters changed while the block was
OOS.
Msg type = REC
Data type = DS-73
Store = Dynamic
Access = RW in any mode
Available in Release 1.0
A predefined set of 16 conditions that may
occur within a block.
Msg type = REC
Data type = DS-72
Store = Dynamic
Access = RW in any mode
Available in Release 9.0
A directory that specifies the number and
starting indices of the data collections in
the transducer block.
Msg type = VAR
Data type = Unsigned16 (2)
Store = Static
Access = RW (OOS)
Available in Release 9.0
Identifies the transducer that follows.
Msg type = VAR
Data type = Unsigned16 (2)
Store = Static
Access = RW (OOS)
Available in Release 9.0
Transducer blocks and views
List of values
See section 2.6 of FF-891
See section 4.8 of FF-903
—
—
—
—
195