Set Up Concentration Measurement; Configure Concentration Measurement Using Prolink Iii - Emerson Micro Motion 2700 Configuration And Use Manual

4.8

Set up concentration measurement

This section guides you through loading and setting up a concentration matrix used for
measurement. It does not cover building a concentration matrix.
The concentration measurement application calculates concentration data from process
temperature and density. Micro Motion provides a set of concentration matrices that
provide the reference data for several standard industry applications and process fluids. If
desired, you can build a custom matrix for your process fluid, or purchase a custom matrix
from Micro Motion .
Note
Concentration matrices can be made available on your transmitter either by loading an existing
matrix from a file or by building a new matrix. Up to six matrices can be available on your transmitter,
but only one can be used for measurement at any given time. See Micro Motion Enhanced Density
Application: Theory, Configuration, and Use for detailed information on building a matrix.
Prerequisites
Before you can configure concentration measurement:
•
•
•
•
•
•
4.8.1

Configure concentration measurement using ProLink III

1.
2.
3.
4.
Configuration and Use Manual
The concentration measurement application must be purchased on your
transmitter.
The concentration matrix you want to use must be available on your transmitter, or
it must be available as a file on your computer.
You must know the derived variable that your matrix is designed for.
You must know the density unit used by your matrix.
You must know the temperature unit used by your matrix.
The concentration measurement application must be unlocked.
Choose Device Tools > Configuration > Process Measurement > Density and set
Density Unit to the density unit used by your matrix.
Choose Device Tools > Configuration > Process Measurement > Temperature and set
Temperature Unit to the temperature unit used by your matrix.
Choose Device Tools > Configuration > Process Measurement > Concentration
Measurement.
Set Derived Variable to the derived variable that your matrix is designed for, and
click Apply.
Important
• All concentration matrices on your transmitter must use the same derived variable. If you
are using one of the standard matrices from Micro Motion, set Derived Variable to Mass
Concentration (Density). If you are using a custom matrix, see the reference information for
your matrix.
Configure process measurement
43