Using Display Menus - Emerson Micro Motion 2400S Configuration And Use Manual

Using the Transmitter User Interface
3.5.3

Using display menus

Note: The display menu system provides access to basic transmitter functions and data. It does not
provide access to all functions and data. To access all functions and data, use either ProLink II or a
customer-supplied DeviceNet tool.
To enter the display menu system, see the flowchart shown in Figure 3-3.
Figure 3-3 Entering the display menu system
Note: Access to the display menu system may be enabled or disabled. If disabled, the OFF-LINE
MAINT option does not appear. For more information, see Section 8.9.
The unlock sequence prevents unintentional entry to the offline menu. A prompt is shown for each
step, and the user has 10 seconds to perform the action.
If no optical switch activity occurs for two minutes, the transmitter will exit the off-line menu system
and return to the process variable display.
To move through a list of options, activate
To select from a list or to enter a lower-level menu,
If a confirmation screen is displayed:
• To confirm the change, activate
• To cancel the change, activate
To exit a menu without making any changes
• Use the
EXIT
• Otherwise, activate
Configuration and Use Manual
Scroll and Select simultaneously
for 4 seconds
Display password
No
enabled?
Unlock
Scroll
Select
Scroll
SEE ALARM or OFF-LINE MAINT
Scroll
Select
Scroll
option if available.
at the confirmation screen.
Scroll
YES
CODE?
Enter password
.
to the desired option, then activate
Scroll
.
.
.
Select
13