Configure Security For The Display Menus - Emerson Micro Motion 9739 MVD Configuration And Use Manual

Configure device options and preferences
June 2019
2. Enable or disable Acknowledge All Alerts as desired.
Option
Enabled (default) Operators can use a single display command to acknowledge all alerts at once.
Disabled

5.3 Configure security for the display menus

Display OFF-LINE MAINT → OFF-LINE CONFG → DISPLAY → OFFLN
Device Tools → Configuration → Transmitter Display → Display Security
ProLink III
Field Communicator Not available
You can control operator access to different sections of the display off-line menu. You can also configure a
password to control access.
Procedure
1. To control operator access to the maintenance section of the off-line menu, enable or disable Off-Line
Menu.
Option
Enabled (default) Operator can access the maintenance section of the off-line menu. .This access is
Disabled
2. To control operator access to the alert menu, enable or disable Alert Menu.
Option
Enabled (default) Operator can access the alert menu. This access is required to view and
Disabled
Note
The transmitter status LED changes color to indicate that there are active alerts, but does not show
specific alerts.
3. To require a password for access to the maintenance section of the off-line menu , enable or disable
Off-Line Password.
Option
Enabled
66
Description
Operators cannot acknowledge all alerts at once. Each alert must be
acknowledged separately.
Description
required for configuration and calibration, but is not required to view alerts.
Operator cannot access the maintenance section of the off-line menu.
Description
acknowledge alerts, but is not required for configuration or calibration.
Operator cannot access the alert menu.
Description
Operator is prompted for the off-line password at entry to the maintenance
section of the off-line menu.
Configuration and Use Manual
MMI-20016855
Micro Motion 9739 MVD Transmitters