Emerson Micro Motion 2700 Configuration And Use Manual page 331

Figure H-6:
The transmitter, core processor, and sensor are all mounted separately. The 4‐wire connection between
the transmitter and core processor must be field wired. The 9‐wire connection between the core processor
and the sensor must be field wired. Power supply must be field wired to the transmitter. This configuration
is sometimes called double‐hop.
A.
B.
C.
D.
E.
F.
Configuration and Use Manual
Remote core processor with remote sensor installation
A
B
Junction box
Sensor
Transmitter
Field‐wired 4‐wire connection
Core processor
Field‐wired 9‐wire connection
Transmitter components and installation wiring
C
D
E
F
323