Measurement Transducer Blocks; View List For The Measurement Transducer Block - Emerson Micro Motion 2700 Configuration And Use Manual

List of values
Definitions for view list
Up to four views are defined for each transducer block.
View
VIEW 1
VIEW 2
VIEW 3
VIEW 4
The number in the cell represents the size of the parameter in bytes. The maximum size of
a view is 122 bytes.
Use the following definitions for the transducer block views tables:
View and
size in view
A.2

Measurement transducer blocks

A.2.1

View list for the measurement transducer block

The following table lists the parameters contained in the measurement transducer block
for measurement parameters.
Four views are defined for the measurement transducer block. The table also shows the
applicable views for each parameter, and the size of the parameter in that view, in bytes.
Table A-3:
Index
0
Configuration and Use Manual
Table A-2: Access
RW (Auto)
The list of valid values to write to an enumerated parameter. This field is
not applicable for read only parameters. Valid value ranges for variable
type parameters are specified in the tables.
Description
Access to the dynamic operating parameters of the transducer block
Access to the static operating parameters of the transducer block
Access to all the dynamic parameters of the transducer block
Access to static parameters not included in VIEW 2
The views that contain the parameter, and the size of the parameter in the
view, in bytes. The number in the cell indicates that the variable is
contained in that particular view. The number is the size of the parameter
in bytes.
Measurement transducer block parameters view list
Name
BLOCK_STRUCTURE
(continued)
Read/write, with the transducer block in Auto
mode
1 2
— —
Transducer blocks and views
View
3 4
— —
129