Assembly
Vapor temperature sensor, AUTOaccurate sensor
(optional accessory, see chapter "Spare Parts and Accessories").
The opening for the vapor temperature sensor is located at the bottom on the side of the
condenser.
The opening for the AUTOaccurate sensor is located at the top center of the condenser.
➜ Remove the sealing cap from the
respective opening of the condenser.
➜ Insert the appropriate temperature
sensor.
The vapor temperature sensor is
inserted in the condenser from the side
whereas the AUTOaccurate sensor is
inserted from the top.
➜ Tighten the temperature sensor with
the screw connection cap.
➜ Plug in the connector plug of the
temperature sensor with the white
mark pointing upwards into the plug
socket on the left side of the device.
The AUTOaccurate sensor can only be used with glassware sets G3,
G3 XL and G6.
Opening for AUTOaccurate sensor
Opening for vapor temperature sensor
Temperature sensor connection
91