Heidolph Hei-VAP Expert Operating Manual page 79

Assembly
Support system for vertical condenser: Glassware sets G1, G3, G3 XL and G6
Assembly parts:
▪ Support rod
▪ Cross clamp with condenser clamp
A hole is located on the left side of the
device for receiving the support rod.
✓ First mount the condenser and then
slide the condenser clamp over the
condenser.
➜ Insert the support rod with the
flattened side downward into the hole.
➜ Secure the support rod with the
knurled screw.
➜ Slide the cross clamp over the support
rod.
➜ Use the knurled screw to secure the
cross clamp on the support rod.
➜ Secure the condenser clamp with the
knurled screw around the condenser.
Support system for vertical condenser: Glassware set G5
Assembly parts:
▪ Support rod
▪ Cross clamp with tension strap
➜ Mount the support system like the
support for G3, G3 XL and G6.
➜ Use the tension strap to secure the
condenser.
Knurled screw for condenser clamp
Condenser clamp
Support rod
Drilled hole
Knurled screw for cross clamp
Tension strap
Knurled screw
79
Cross clamp
Knurled screw
Knurled screw
Cross clamp