Heidolph Hei-VAP Expert Operating Manual page 71

Assembly
➜ Place the heating bath with the recess
to the left on the guide rail.
➜ Move the heating bath slightly to the
right and left, so that it locks securely.
Moving the heating bath
When using larger evaporating flasks or adapters between evaporating flask and vapor
tube, it may be necessary to increase the distance between the heating bath and the
drive.
✓ The base device is positioned on a stable, level surface.
✓ There is about 20 cm space for movement on the same base to the right of the
heating bath.
➜ Hold the heating bath by both handles and pull it to the right to the desired position.
Caution:
Risk of crushing!
When moving the heating bath towards the device, your fingers may
get caught between heating bath and device.
When moving the heating bath, always hold it at the insulated handle.
Heating bath
Recess
71