Heidolph Hei-VAP Expert Operating Manual page 50

Operation
2. Loading ramp profiles from the list
✓ You are in the ramp profile mode of the
application "Extended".
➜ Swipe the screen from right to left to
switch to the list of ramp profiles.
➜ Tap the desired ramp profile.
✓ The selected ramp profile is highlighted
in orange.
➜ Tap the "Load" symbol.
✓ The start page is displayed with the
selected ramp profile, and the process
can be started with the pre-set
parameters.
3. Loading existing ramp profiles 1 and 2
✓ You are in the ramp profile mode of the application "Extended".
✓ You assigned ramp profiles 1 and 2.
➜ Tap the 1 or 2 symbol (quick-selection
buttons).
➜ The symbol turns orange, the selected
ramp profile is loaded, and you can
start the process immediately.
4. Assigning ramp profiles to a quick-selection button
✓ You are in the ramp profile mode of the application "Extended".
✓ You have selected and loaded a ramp profile from the list.
➜ Tap the 1 or 2 symbol for a couple of
seconds.
✓ The message "Ramp 1 saved" or "Ramp
2 saved" appears, and 1 or 2 symbol is
highlighted in orange.
✓ The favorites 1 and 2 are tagged in the
list of ramp profiles.
50