Heidolph Hei-VAP Expert Operating Manual page 44

Operation
3. Assigning the quick-selection buttons
You can assign two favorites to the quick-selection buttons (asterisk symbol) on the start
screen. This enables you to load these favorites directly.
Re-assigning the quick-selection buttons
✓ You are in the favorites mode in the application "Extended".
✓ The quick-selection buttons are not yet assigned to a favorite.
➜ Tap the symbol for quick-selection 1 or 2.
✓ The favorites list is displayed.
➜ Select a favorite and confirm with "Load".
➜ Keep the desired quick-selection button
pressed for approx. 3 sec.
✓ The selected favorite is stored on the
quick-selection button.
✓ The favorite in the list of favorites is
tagged with the button assignment.
Changing the assignment of the quick-selection button
✓ One of the quick-selection buttons is assigned to a favorite.
➜ Swipe the screen from right to left to switch to the list of favorites.
➜ Load the desired favorite.
➜ Keep the quick-selection button pressed
for approx.
3 sec. to store the new favorite.
Loading a favorite with the quick-selection button
✓ You are in the favorites mode in the application "Extended".
✓ You have assigned favorites 1 and 2.
➜ Tap the 1 or 2 symbol.
➜ The symbol turns orange, the selected
favorite is loaded, and you can start the
process immediately.
▪ If no favorite is currently loaded, you can jump to page 3 by keeping the symbol
pressed for some time in order to save the current parameters. In doing so, the
favorite is not stored on the quick-selection button.
▪
If a favorite is already loaded, you can save the current parameters by keeping the
selected quick-selection button pressed for some time.
44