Operation
Parameters after the end of the ramp
profile
➜ Swipe the screen from right to left to
switch to the list of parameters which
apply after the ramp profiles have been
completed.
➜ Determine:
▪
Maintain or stop vacuum
▪
Automatic or manual hysteresis
▪
Continue or stop rotation
▪
Continue or stop heating bath
▪
Hold or raise the lift
▪
Continue or stop the chiller
✓ When parameters have been changed,
the name of the profile gets an "*".
Saving the ramp profile
➜ Return to the ramp profile view.
➜ Tap the "Save" symbol.
➜ Enter a new name and confirm with the
green checkmark.
✓ The new ramp profile is saved and can
be loaded.
49