Card
• Wait until UPS battery capacity exceeds a set percentage value in (%), and then automatically
restart the UPS.
- Then restart Group 1 after a set time in (s).
- Then restart Group 2 after a set time in (s).
Enable/Disable
Each option listed above can be enabled or disabled with check-boxes.
When disabled, the option will be greyed out.
2.8 Card
2.8.1 System information
System information is an overview of the main Network Module information.
The COPY TO CLIPBOARD button will copy the information to the clipboard.
Identification
• System name
• Product
• Physical name
• Vendor
• UUID
• Part number
• Serial number
• Hardware version
• Location
• Contact
Firmware information
• Firmware version
• Firmware SHA
• Firmware date
• Firmware installation date
• Firmware activation date
• Bootloader version
2.8.2 System logs
Press the Download System Logs button to select the log files to download.
For the list of system logs, see the Information>>>System Logs codes section in the detailed help.
2.8.3 Administration
Network module firmware
• Monitors the information for the two embedded firmware.
• Upgrade the Network Module firmware.
• Activate one of the embedded firmware.
Contextual Help – 40