Resetting Username And Password - Eaton Network-M2 User Manual

Resetting username and password
2. Enable the "Keep shutdown sequence running until the end and then restart (forced reboot)".
3. Enable the "Automatically restart the UPS when battery capacity exceeds" and set it to 0%.
The storage will restart first, right after utility recovery without waiting the battery capacity to exceed a %
limit.
4. Set Then Group 1 after to 120s.
The database servers will restart 120s after the utility recovery.
5. Set Then Group 2 after to 60s.
The database servers will restart 180s after the utility recovery.

3.14 Resetting username and password

1. Navigate to Settings>>>Users.
2. Press the pen icon
3. Change username and save the changes.
4. Select Reset password and choose from the following options :
• Generate randomly
• Enter manually
• Force password to be changed on next login
5. Enter your own password to confirm the changes.
6. Save the changes.
Servicing the Network Management Module – 70
to edit user information.