Actions; Default Settings Parameters And Limitations; Certificates; Server Certificates - Eaton Network-M2 User Manual

Actions
Add
1. Press the New button to create new trap receivers.
2. Set following settings:
• Status
• Application name
• Hostname or IP address
• Port
• Protocol
• Trap community (V1) / User (V3)
3. Press the SAVE button.
Remove
Select a trap receiver and press the Delete button to remove it.
Edit
Press the pen icon to edit trap receiver information and access to its settings.
Test all traps
Press the Test all traps button to send the trap test to all trap receivers.
Separate window provides the test status with following values:
• In progress
• Request successfully sent
• invalid type
 For details on SNMP trap oid, see the Information>>>SNMP trap oid sectionin the detailed help.

Default settings parameters and limitations

 For details on default parameters and limitations, see the Information>>>Default settings
parameters section in the detailed help.

2.4.7 Certificates

Server certificates

Manage server certificates by :
• Generating CSR and import certificates signed by the CA.
• Generating new self-signed certificates.
Server certificates table
The table shows the following information for each server certificates.
• Used for
• Issued by
• Valid from
Settings
Contextual Help – 25