Domain; Ipv6 - Eaton Network-M2 User Manual

Settings
• Enter the gateway address.
The gateway address allows connections to devices or hosts attached to different network
segments.
Dynamic (DHCP)
•
Select dynamic DHCP to configure network parameters by a BootP or DHCP server.
If a response is not received from the server, the UPS Network Module boots with the last saved
parameters from the most recent power up. After each power up, the UPS Network Module makes
five attempts to recover the network parameters.

Domain

The DNS is a hierarchical decentralized naming system for computers, services, or other resources
connected to the Internet or a private network.
Press the More button to configure the network settings, select either the Static or Dynamic settings.
Static
•
• Enter the Network Module Hostname.
• Enter the Network Module Domain name.
• Primary DNS server.
Enter the IP address of the DNS server that provides the translation of the domain name to the
IP address.
• Secondary DNS server.
Enter the IP address of the secondary DNS server that provides the translation of the domain
name to the IP address when the primary DNS server is not available.
Dynamic
•
• Enter the Network Module Hostname.

IPv6

IPV6 status and the first three addresses are displayed.
Press the More button to configure the network settings and get more information, press the More button for
access to the following IPV6 details.
Current configuration
•
• Address
• Gateway
Address settings
•
• Mode
• Manual
• Router
DNS settings
•
• Get automatically (will hide the following settings)
• Primary DNS
• Secondary DNS
Contextual Help – 22
• Addresses
• Prefix
• Gateway