Playback - Basics; Playing Back A Tape - Sony Handycam DCR-PC101E Operating Instructions Manual

— Playback – Basics —

Playing back a tape

You can monitor the recorded tape etc. on the
LCD screen. If you close the LCD panel, you can
monitor the playback picture in the viewfinder.
You can also control playback using the Remote
Commander supplied with your camcorder.
(1) Prepare the power source and insert the
recorded tape.
(2) Set the POWER switch to VCR while pressing
the small green button.
(3) Press OPEN to open the LCD panel.
(4) Press to rewind the tape.
(5) Press
to start playback.
(6) Adjust the volume following the steps below.
1 Press FN to display PAGE1.
2 Press VOL. The screen to adjust volume
appears.
3 Press –/+ to adjust the volume.
– : to decrease the volume
+ : to increase the volume
(7) Press OK to return to PAGE1.
3
52
4
(1)
(2)
(3)
(4)
(5)
(6)
1
2
3
(7)
5
1
2
POWER LOCK
6
FN
– VOL
The bar indicator/
OK
+