Using The Viewfinder - Sony Handycam DCR-PC101E Operating Instructions Manual

Using the viewfinder

Pull out the viewfinder until it clicks, and then
turn the LCD panel over and move it back to
your camcorder body with the LCD screen facing
out. You can operate with the touch panel using
the viewfinder.
Use the viewfinder in the following case:
When operating camera brightness and the fader
(only in CAMERA) on the touch panel using the
viewfinder.
(1) Set the POWER switch to CAMERA or
MEMORY. Pull out the viewfinder until it
clicks, and then turn the LCD panel over and
move it back to your camcorder body with the
LCD screen facing out.
(2) Press OFF. The message PANEL OFF
appears on the screen.
(3) Press OK. The LCD screen is turned off.
(4) Using the viewfinder, press the LCD screen.
EXPOSURE, OK,
(only in CAMERA) appear.
(5) Select a desired item, then press
EXPOSURE: adjust the exposure by pressing
–/+.
FADER: press FADER until the desired fader
mode is displayed.
The indicator changes as follows:
FADER t M. FADER t BOUNCE
t MONOTONE t OVERLAP t
WIPE t DOT t (no indicator)
ON: The LCD screen lights up, then
becomes Mirror Mode.
ON and FADER
OK.
(1)
(2)
(3)
(4)
(5)
t
t
t t
t t
t
93