To Display The Screen Indicators - Display Function - Sony Handycam DCR-PC101E Operating Instructions Manual

Playing back a tape
To display the screen indicators
– Display function
Press DISPLAY/TOUCH PANEL on your
camcorder or DISPLAY on the Remote
Commander supplied with your camcorder.
The indicators disappear from the screen.
To make the indicators appear, press DISPLAY/
TOUCH PANEL or DISPLAY again.
About date/time and various settings
Your camcorder automatically records not only
images on the tape but also the recording data
(date/time or various settings when recorded)
(Data code).
Follow the steps below to display the data code
using the touch panel or the Remote
Commander.
Using the touch panel
(1) In playback, press FN and select PAGE2
(p. 32).
(2) Press DATA CODE.
(3) Select CAM DATA or DATE DATA, then
press OK.
(4) Press EXIT.
54
DATA CODE
DISPLAY/
TOUCH PANEL
(1)
(2)
DATACODE
OFF OK
CAM DATE
DATA DATA
(3)
(4)
DISPLAY