Editing; Dubbing A Tape - Sony Handycam DCR-PC101E Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
You can dub or edit on the VCR connected to
your camcorder using your camcorder as a
player.
Connect your camcorder to the VCR using the
A/V connecting cable supplied with your
camcorder.
Before operation
•Set DISPLAY to LCD in the menu settings.
(The default setting is LCD.)
•Press the following buttons to make the
indicator disappear so that they will not be
superimposed on the edited tape:
On your camcorder:
DISPLAY/TOUCHPANEL
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2) Connect the A/V connecting cable to A/V
jack. Prepare the VCR for recording, then set
the input selector to LINE.
Refer to the operating instructions of the VCR.
(3) Set the POWER switch to VCR on your
camcorder.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your
VCR.
(1)
(2)
(3)
(4)
(5)
109